LAND SHARK POWER CUTTER
The LAND SHARK ™ cutter was designed by Special Service and Supply in co-operation with Emergency Squad Training Institute to meet the need for a powerful, lightweight, easily controlled, self-contained, heavy-duty extrication and rescue cutter that requires no noisy external pumps, long hoses, or batteries and chargers.
The LAND SHARK ™,
When air or hydraulic pump operation is required, the pump is powered by a rugged, factory-preset air regulator. The regulator is manufactured to the Compressed Gas Association (CGA Standards. The regulator operates on any air supply cylinder equipped with a CGA valve, supplying air from 150 P.S.I. to 6,000 P.S.I. cylinders. No adjustment by the operator is required. The air regulator includes a seven-year warranty and is equipped with a pressure relief valve to prevent over-pressurization of the regulator, hose, and air/hydraulic pump.
The air/hydraulic pump is a heavy-duty, self-contained pump that operates by moving the positive-positioning, three-way control valve with either the operator's hand or foot, providing up to 10,000 PSI of hydraulic pressure to the LAND SHARK Cutter. The 4-way control valve, with a center “off” position, holds the jaws in place and prevents inadvertent opening or closing of the LAND SHARK. A 10,000 P.S.I. hydraulic pressure relief valve is incorporated into the air/hydraulic pump to avoid the over-pressurization of the LAND SHARK ™ cutter and hoses.
The LAND SHARK ™ Cutter is designed and built in America to keep the tool's weight and size to an absolute minimum while delivering the most significant cutting force, reliability, and ease of operation for rescue operations.
The LAND SHARK ™,
- is designed to efficiently deal with demanding cutting applications in rescue and incorporates many unique features not found in any other cutting tool.
- Designed, engineered, and made in the USA.
- Works both on land and underwater.
- Accompanying air/hydraulic pumps and controls are designed to operate underwater, unlike battery and small engine-powered hydraulic cutting tools.
- Jaws that open a whole 5½” to accept and cut the largest vehicle door and roof pillars. The 10,000 pounds of hydraulic pressure applied to the jaws, and the exclusive taper of the hardened jaw design, combine to effortlessly slice through the “A”, “B”, and “C” posts and roofs of vehicles. Steel, aluminum, titanium, fiberglass, and other materials are easily cut to facilitate the rapid extrication of accident and machinery entrapment victims.
- Jaws are operated with the foot-operated 4-way control valve on the air/hydraulic pump. The operator’s hands are free to position and control the tool. We eliminate confusion, loss of cutting-tool control, and instability associated with handle-mounted controls.
- Has an exclusive air/hydraulic power system or a high-efficiency manual pump, eliminating the need for gas or diesel-powered generators, battery chargers, hydraulic pumps, or long hydraulic hoses, along with their associated starting and maintenance problems, tripping hazards, or the need to carry spare fuel cans, batteries, and chargers required by other cutting tools.
- Virtually silent operation with either its air/hydraulic pump and optional double-acting hand-operated pump promotes
- Safety and efficient scene control, permitting communication between rescue personnel without requiring shouting or hand signals. Lower noise levels at the scene reduce the stress on accident victims and rescue personnel. The air/hydraulic pump operates from SCBA cylinders, SCUBA tanks onboard vehicle breathing air systems, a vehicle’s CAFS system, or an air brake system.
- It is the only hydraulic cutting tool designed for cutting operations above ground, in confined spaces, below grade, and underwater. The “exhaust” from the air/hydraulic pump is clean, breathable air, eliminating the worry about exhaust fumes, asphyxiation, ignition sources, electric shock, and air pollution associated with other tools.
- It is the only hydraulic cutting tool designed to be self-contained in its operation. The optional lightweight aluminum,
When air or hydraulic pump operation is required, the pump is powered by a rugged, factory-preset air regulator. The regulator is manufactured to the Compressed Gas Association (CGA Standards. The regulator operates on any air supply cylinder equipped with a CGA valve, supplying air from 150 P.S.I. to 6,000 P.S.I. cylinders. No adjustment by the operator is required. The air regulator includes a seven-year warranty and is equipped with a pressure relief valve to prevent over-pressurization of the regulator, hose, and air/hydraulic pump.
The air/hydraulic pump is a heavy-duty, self-contained pump that operates by moving the positive-positioning, three-way control valve with either the operator's hand or foot, providing up to 10,000 PSI of hydraulic pressure to the LAND SHARK Cutter. The 4-way control valve, with a center “off” position, holds the jaws in place and prevents inadvertent opening or closing of the LAND SHARK. A 10,000 P.S.I. hydraulic pressure relief valve is incorporated into the air/hydraulic pump to avoid the over-pressurization of the LAND SHARK ™ cutter and hoses.
The LAND SHARK ™ Cutter is designed and built in America to keep the tool's weight and size to an absolute minimum while delivering the most significant cutting force, reliability, and ease of operation for rescue operations.
LAND SHARK POWER CUTTER FEATURES
The LAND SHARK ™ features include:
- Length: 28 3/4"
- Width at widest point: 6 1/2"
- Depth of cut: 5 1/4"
- Cutting Force (at tip of blades), exceeds 35,000 pounds per square inch
- Weight: 30.8 pounds
- Operating Pressure: 10,000 P.S.I.
- Virtually Silent Operation
- Hydraulic fluid: Safe mineral oil
- Controls: Positive lever, foot or hand operated
- Handles: Ergonomic for positive tool control
- Operation: True one person operation
- Safety Standards: Meets or exceeds ANSI/ASME B30.1 Safety Standard for hydraulic tools
- Warranty: Lifetime warranty on hydraulic cylinder
LAND SHARK CUTTER DEVOURS "A" PILLAR FOR ROOF LAND SHARK CUTTER EATS "B" PILLAR FOR ROOF REMOVAL
REMOVAL
REMOVAL
Shipping weight 80 lb. Ships via FedEx Ground®
