Special Service and Supply is a Service Disabled Veteran Owned Small Business that has been providing quality American Engineered and American Made extrication tools forrescue professionals over fifty years. Our products include the Extricator Rescue Sets, the "Original" Air Chisel specifically designed and built for rescue, hydraulic spreaders, hydraulic cutters, rescue blankets, entry tools, come a longs and hydraulic rams.
AIR CHISEL
The "ORIGINAL AIR CHISEL" for rescue is the MODEL C-10 AIR CUTTING GUN". ™ This is the “original" air chisel often referred to as an air hammer, that was specifically designed to meet the stringent demands of you, the rescue professional. It is hardest hitting, lightest weight and the most powerful air chisel in it's class. This air chisel is designed to provide you with exceptional cutting power in a compact light weight tool.
The "C-10 ORIGINAL RESCUE AIR CUTTING GUN" is designed to rapidly cut thru heavy metal including quarter inch (1/4”) mild steel plate, three quarter inch (3/4”) mild steel bolts, automobile safety door lock bolts, vehicle door posts, automobile roofs, seat brackets, fiberglass, carbon fiber, aluminum, metal buildings, metal roofing and sheet metal ducts in a matter of seconds.
The C-10 AIR CUTTING GUN has the lowest air consumption in the industry. The original air chisel cutting gun, is often copied, but it's performance and reliability have never been duplicated!
The supplied factory preset high pressure air regulator requires absolutely no adjustment on the part of the operator. It is designed to operate with any air supply utilizing a CGA valve with a pressure range from 400 PSI to 6,000 PSI without the need for any adjustment. This heavy duty regulator is equipped with a safety relief valve, the gauge body is protected by a shock absorbing rubber guard, and the quick attachment hand tight nut, are all designed to provide rapid setup and reliable trouble free service.
The C-10 Air Cutting GunSet is supplied with an assortment of three standard chisels, a short flat chisel for heavy duty cutting, a long flat chisel for heavy duty cutting in hard to reach places and either a "T" type or a double "T" type chisel for cutting sheet metal, on vehicles and aircraft. Each chisel comes with our exclusive performance proven, quick change, screw type safety retainer. This is the only chisel retainer that positively retains the chisel under all conditions.
HYDRAULIC RESCUE AND EXTRICATION TOOLS
RS-10 5 ton Extricator Set
The Extricator® series of extrication tool sets and the Original Air Cutting Gun™are designed to compliment each other and provide the you, the trained professional rescuer with the ability to perform difficult extrications using hydraulic spreaders, hydraulic cutters, and manually or hydraulic powered rescue tools in combination.
The "BOSS TOOL"™ was designed to compliment or replace the wedge and spreader in auto extrications, The "BOSS TOOL"™ provides virtually silent operation with the largest effective jaw surface area in the industry along with an amazing spreading force of more than 12,000 lbs at the closed tips. The spreading force increases dramatically as the jaws open.
The Land Shark Cutter™ provides rapid cutting capabilities, large jaw opening, in excess of five inches, virtually silent operation, and light tool weight. The Land Shark Cutter is powered by either an air/hydraulic powered pump or it can operate on a fully self contained mode with a manually operated pump. The Land Shark Cutter may be operated in open air, confined spaces and even works under water. The exhaust gas from the air/hydraulic pump is clean breathable air, eliminating the noise and exhaust fumes from gas powered compressors
The RS-4, RS-5 and RS-6 Aircraft Rescue Tool Sets were designed as self contained rescue tool sets to meet the Federal Aviation Administration, (FAA), Requirements for Self Contained Aircraft Rescue Tool Sets. The RS-4, RS-5, and RS-6 Aircraft Rescue Tool Sets provide ten tons of lifting and spreading capacity along with an assortment of essential hand tools to effect rapid extrication from aircraft or vehicle accidents. These Aircraft Rescue Tool Sets offer a choice of hydraulic spreaders and pumps designed to meet the individual users specific requirements for self contained tools or air tools.
ALUMINIZED RESCUE BLANKETS
Victim protected by M-1 Rescue Blanket during extrication
The ALUMINIZED RESCUE BLANKET™ is designed to the exacting standards of Emergency Squad Training Institute to provide a reusable heavy duty fire resistant rescue blanket constructed from aluminum infused, high strength fire resistant rip stop ParaAramid, (Nomex®), fabric. The Aluminized Rescue Blanket is a proven reusable thermal rescue blanket designed to provide flash fire protection by reflecting the heat away from the victim while providing the victim with protection from flying debris such as glass shards, plastic chips and metal fragments frequently encountered during auto extrication and rescue operations.
RESCUE CHAINS
Grade 100 Rescue Chain Set
The C-2 RESCUE CHAIN SET is comprised of two Grade 100 chain slings, the first chain sling is a five foot long chain with a grab hook, a round adjustment ring and a special attachment hook. The second chain sling is composed of a twelve foot long chain with a grab hook, an oval adjustment ring and a special attachment hook. Both chain slings are constructed with American Made, 9/32 inch, Grade 100 highly flexible, high carbon alloy chain and forged alloy steel hooks and rings. The entire chain sling is rated as Grade 100 and is OSHA approved for overhead lifting. Each chain sling has a permanently installed identification tag with serial number, proof test information and working load limits. These Rescue Chains are not to be confused with light duty gold colored "tie down chains" or "hardware store" chains which are not rated for overhead lifting or rescue operations!
Custom lengths and configurations are available upon request. There are no set up fees, design charges or special costs for custom chain sling assemblies. You only pay for the components in the assembly.
Special Service and Supply is a Service Disabled Veteran Owned Small Business dedicated to the manufacturing of quality extrication and rescue tools, we are committed to the responsible use of our natural resources, while providing our customers with the finest inAMERICAN MADE hydraulic extrication spreaders, cutters, rescue tools and hydraulic rams.
Located in Northwestern Colorado at 410 Courtney Run, Craig, CO. USA 81625, we will ship your order anywhere in the world. We can be contacted via our convenient Contact Page. We will respond to your inquiry promptly.
Our tools are often imitated but their performance, reliability and value have never been duplicated.
Extrication tools are our business, not just a sideline.