RESCUE TOOLS for AIRCRAFT
RS-4 AIRCRAFT RESCUE TOOLS
EXTRICATOR RS-4, 10 TON AIRCRAFT RESCUE TOOLS
The Extricator® RS-4, 10 TON AIRCRAFT RESCUE TOOLS AND EXTRICATION TOOL SET is a fully, self contained set of hydraulic rescue tools designed to meet the demands of aircraft rescue and extrication in a set that has the ability to provide up to 10 tons of self contained power in compact spaces without the need for external power generation equipment. When minutes count, this hydraulic rescue tool set will facilitate fast and efficient rescue operations by pushing or spreading entrapping materials. The straight ram, ram toes, hydraulic spreader and hydraulic wedge will move or lift heavy objects, move obstructions and raise collapsed metal or structures. The powerful hydraulic BOSS Tool provides 6 tons of spreading power at the closed tips, with the power increasing as the tips open. The 10-ton straight ram, with 6” stroke is used with 5 inch, 10 inch, 18 inch and 30 inch special heavy wall high strength extension tubes and attachments to provide powerful lifting and spreading force where needed. The spreaders and hydraulic ram may be operated under water.
The H-1T-10 hand operated pumps utilize an internal pressure relief valve provides overload protection, complying with ANSI/ASME B30.1 safety standards. These new pumps also incorporate a convenient two speed design which provides reliability and speed in tough rescue applications with new features to provide ease of operation for many years. The new two stage design has a 1st stage that provides 200 PSI and the second stage produces 10,000 PSI. The two stage high flow design of the H1T-10 pump reduces handle strokes, providing more rapid tool operation with a larger hydraulic fluid reservoir. The fill port has been relocated to the top of the reservoir to the rear of the new carrying handle and a larger redesigned hydraulic fluid control valve was provided for easy operation while wearing gloves. The longer pump handle with ergonomic grip has been integrated into the design to reduce the pumping force required by the operator. For those applications where corrosion or weight are considerations, the optional Model H-1T-A-10 aluminum pump provides similar performance, size and features while weighing in at mere 9 lbs. is available.
The tools and hoses are equipped with new high pressure high flow fittings matched to the increased flow of the H-1T-10 pump, along with dust caps to keep dirt out of the fittings when a tool is not in use.
The wedge type hydraulic spreader is a compact 3/8" at the closed tips, opening to a full 4", is designed to break open structural components or open a hole for the larger spreader or work in conjunction with the hydraulic wedge when additional prying force is necessary. The hydraulic spreader is 3/4" at the tips and opens to over 12". The straight ram provides 10 tons of lifting and spreading capacity. The straight ram is provided with a variety of attachments designed to provide spreading or lifting options ranging all the way from 3/4" to 48"
The H-1T-10 hand operated pumps utilize an internal pressure relief valve provides overload protection, complying with ANSI/ASME B30.1 safety standards. These new pumps also incorporate a convenient two speed design which provides reliability and speed in tough rescue applications with new features to provide ease of operation for many years. The new two stage design has a 1st stage that provides 200 PSI and the second stage produces 10,000 PSI. The two stage high flow design of the H1T-10 pump reduces handle strokes, providing more rapid tool operation with a larger hydraulic fluid reservoir. The fill port has been relocated to the top of the reservoir to the rear of the new carrying handle and a larger redesigned hydraulic fluid control valve was provided for easy operation while wearing gloves. The longer pump handle with ergonomic grip has been integrated into the design to reduce the pumping force required by the operator. For those applications where corrosion or weight are considerations, the optional Model H-1T-A-10 aluminum pump provides similar performance, size and features while weighing in at mere 9 lbs. is available.
The tools and hoses are equipped with new high pressure high flow fittings matched to the increased flow of the H-1T-10 pump, along with dust caps to keep dirt out of the fittings when a tool is not in use.
The wedge type hydraulic spreader is a compact 3/8" at the closed tips, opening to a full 4", is designed to break open structural components or open a hole for the larger spreader or work in conjunction with the hydraulic wedge when additional prying force is necessary. The hydraulic spreader is 3/4" at the tips and opens to over 12". The straight ram provides 10 tons of lifting and spreading capacity. The straight ram is provided with a variety of attachments designed to provide spreading or lifting options ranging all the way from 3/4" to 48"
AIR CHISEL
The AIR CUTTING GUN™ SET, MODEL C-10A is the "original" air chisel designed for rescue and is included in this aircraft rescue set to provide easy, rapid cutting of sheet metal, aluminum and steel plate up to ¼” thick. The C-10A Air Cutting Gun may be operated from any SCUBA or SCBA air cylinder from 2250 P.S.I to 6000 P.S.I. or any air cylinder equipped with a CGA valve, without the need to adjust the regulator. The C-10A model number designates the additional chisels provided with this aircraft rescue set.
The AIR CUTTING GUN SET, MODEL C-10A provides:
· SPECIAL HIGH IMPACT AIR CUTTING GUN OPERATING ON 300 P.S.I. WORKING AIR PRESSURE
· HIGH PRESSURE, HIGH VOLUME, FACTORY PRE-SET, SINGLE STAGE REGULATOR OPERATES ON 6000 P.S.I. OR
LESS AIR CYLINDERS WITHOUT THE NEED FOR SEA ADJUSTMENT.
· FOOT LONG AIR HOSE WITH 300 P.S.I. WORKING PRESSURE.
· TWO (2) “T” TYPE SHEET METAL CHISELS
· TWO (2) SEVEN INCH FLAT CHISELS
· TWO (2) FIFTEEN INCH FLAT CHISELS
· THREE (3) POSITIVE RETENTION QUICK CHANGE CHISEL RETAINERS
· LOCKABLE/SEALABLE 16 GAUGE STEEL AIR CUTTING GUN STORAGE BOX WITH REGULATOR PEDESTAL, AIR
GUN LUBRICANT, OPERATION VIDEO AND OPERATION AND MAINTENANCE MANUAL
· THIS AIR HAMMER IS DESIGNED TO CUT QUARTER INCH (1/4”) MILD STEEL PLATE, THREE QUARTER INCH
(3/4”) MILD STEEL BOLTS, AUTOMOBILE SAFETY DOOR LOCK BOLTS, DOOR POSTS, STEEL DOORS, SHEET
METAL, AIRCRAFT FRAMES AND BODIES IN A MATTER OF SECONDS.
· THIS TOOL KIT INCLUDES A HEAVY DUTY LOCKABLE OR SEALABLE METAL STORAGE BOX.
Every C-10A AIR CUTTING GUN SET is supplied with a heavy duty metal storage box, fifteen foot long air hose, dispenser bottle of lubricating oil, an instruction video, Operation and Maintenance Manual, all backed up by our exclusive manufacturer's support.
Often imitated, but never duplicated, the C-10 AIR CUTTING GUN is the most powerful air chisel in its class and carries a 2 year warranty, the longest in the industry. The air regulator is 100% factory tested and comes with an unprecedented 7 year warranty! This air cutting gun was specifically designed to meet the rugged demands of rescue and extrication. This is not a “muffler shop air hammer”.
The AIR CUTTING GUN SET, MODEL C-10A provides:
· SPECIAL HIGH IMPACT AIR CUTTING GUN OPERATING ON 300 P.S.I. WORKING AIR PRESSURE
· HIGH PRESSURE, HIGH VOLUME, FACTORY PRE-SET, SINGLE STAGE REGULATOR OPERATES ON 6000 P.S.I. OR
LESS AIR CYLINDERS WITHOUT THE NEED FOR SEA ADJUSTMENT.
· FOOT LONG AIR HOSE WITH 300 P.S.I. WORKING PRESSURE.
· TWO (2) “T” TYPE SHEET METAL CHISELS
· TWO (2) SEVEN INCH FLAT CHISELS
· TWO (2) FIFTEEN INCH FLAT CHISELS
· THREE (3) POSITIVE RETENTION QUICK CHANGE CHISEL RETAINERS
· LOCKABLE/SEALABLE 16 GAUGE STEEL AIR CUTTING GUN STORAGE BOX WITH REGULATOR PEDESTAL, AIR
GUN LUBRICANT, OPERATION VIDEO AND OPERATION AND MAINTENANCE MANUAL
· THIS AIR HAMMER IS DESIGNED TO CUT QUARTER INCH (1/4”) MILD STEEL PLATE, THREE QUARTER INCH
(3/4”) MILD STEEL BOLTS, AUTOMOBILE SAFETY DOOR LOCK BOLTS, DOOR POSTS, STEEL DOORS, SHEET
METAL, AIRCRAFT FRAMES AND BODIES IN A MATTER OF SECONDS.
· THIS TOOL KIT INCLUDES A HEAVY DUTY LOCKABLE OR SEALABLE METAL STORAGE BOX.
Every C-10A AIR CUTTING GUN SET is supplied with a heavy duty metal storage box, fifteen foot long air hose, dispenser bottle of lubricating oil, an instruction video, Operation and Maintenance Manual, all backed up by our exclusive manufacturer's support.
Often imitated, but never duplicated, the C-10 AIR CUTTING GUN is the most powerful air chisel in its class and carries a 2 year warranty, the longest in the industry. The air regulator is 100% factory tested and comes with an unprecedented 7 year warranty! This air cutting gun was specifically designed to meet the rugged demands of rescue and extrication. This is not a “muffler shop air hammer”.
RESCUE BLANKET
The Rescue Blanket™, Model M-1 is the "original" heavy duty, reusable, aluminum infused Flame Resistant Para- Arimid rescue blanket. The M-1 Rescue Blanket is Made in America, constructed of the finest heavy duty aluminum infused, rip stop Para-Aramid fabric available. This blanket is designed to provide years of reliable service, the Rescue Blanket’s large 72” x 80” (182 cm x 203 cm) nominal size aluminum infused heavy duty, cut and fire resistant material affording maximum protection for the patient during auto extrication and rescue situations. The aluminum infused fabric can’t be beaten for its heat reflection in a flash fire. Glass shards, chips, saw sparks and debris are repelled by the heavy duty rip stop aluminum infused Para-Aramid fabric, providing a high degree of protection for the victim during the rescue operation.
The Aluminized Rescue Blanket, Model M-1, comes with a heavy duty protective storage case, constructed of water resistant rubberized nylon fabric. The storage case is designed to keep the blanket clean and dry while protecting the shiny aluminized surface from damage during storage.
The Aluminized Rescue Blanket is designed to be reused for many years. Grease, oil, fuels and bodily fluids are easily removed and cleaned with soap and water, common disinfectants may be used to eliminate biologic contaminants. The Aluminized Rescue Blanket should be cleaned, disinfected and air dried prior to storage in its protective case.
The Aluminized Rescue Blanket, Model M-1, comes with a heavy duty protective storage case, constructed of water resistant rubberized nylon fabric. The storage case is designed to keep the blanket clean and dry while protecting the shiny aluminized surface from damage during storage.
The Aluminized Rescue Blanket is designed to be reused for many years. Grease, oil, fuels and bodily fluids are easily removed and cleaned with soap and water, common disinfectants may be used to eliminate biologic contaminants. The Aluminized Rescue Blanket should be cleaned, disinfected and air dried prior to storage in its protective case.
FUEL LINE PLUG SET
The FUEL LINE PLUG SET™, Model F-2 consists of a combination of ten soft and hard wood plugs supplied in assorted sizes ranging from 1/8” to 1½” in diameter provides you with the equipment needed to completely seal broken fuel and hydraulic lines, leaking pipes, and tanks with openings ranging in size from 1/8" to 1-1/2" in diameter. These plugs are designed to provide a safe, non-sparking, inexpensive and an environmentally responsible, method of temporarily plugging leaking fuel lines, hydraulic lines and holes in tanks, drums or pipes. Plugging the leak is accomplished by driving the plug into the leaking fuel or hydraulic line, pipe or hole. After the leak is stopped the system can be safely drained at a control valve.
In emergency situations, stopping the flow of the leaking liquid greatly reduces the danger to rescuers, victims and the likelihood of fire, explosion, pollution, chemical exposure hazards, slip and fall hazards and related environmental cleanup costs associated with leaking fuel tanks, hydraulic lines, fuel lines, chemical lines, and leaking fuel or chemical drums.
In addition to reducing the fire, pollution and exposure hazards created by leaking petroleum and chemical product lines, cleanup and remediation time and costs are greatly reduced.
In emergency situations, stopping the flow of the leaking liquid greatly reduces the danger to rescuers, victims and the likelihood of fire, explosion, pollution, chemical exposure hazards, slip and fall hazards and related environmental cleanup costs associated with leaking fuel tanks, hydraulic lines, fuel lines, chemical lines, and leaking fuel or chemical drums.
In addition to reducing the fire, pollution and exposure hazards created by leaking petroleum and chemical product lines, cleanup and remediation time and costs are greatly reduced.
HAND TOOLS
The Hand Tool Set included in this kit are the most frequently used and include: locking pliers, wire cutters, 2 hammers, metal cutting shears, 3 Flat tip and 3 Phillips screwdrivers, pliers, adjustable wrench, cold chisel, hack saw with 6 blades, seat-belt cutter and Survival Escape Axe®. This tool assortment exceeds the requirements of FAA Circular 150/5210-14B. The tools are designed to provide rescue personnel with the most frequently needed, American Made, tools to rapidly effect rescue from an aircraft, vehicle, other entrapment or structural collapse situation.
RS-4, 10 Ton SPECIAL AIRCRAFT RESCUE TOOLS SET
1. H-2T Dual Flow 10,000 P.S.I. Pump & Hose assembly with quick connectors (2 each)
2. H-7T Short 10 ton ram (6” stroke)
3. H-8T Long 10 ton ram (10” stroke, (Optional, NOT SHOWN)
4. H-20-10 30” Extension tube
5. H-22-10 18” Extension tube
6. H-23-10 10” Extension tube
7. H-24-10 5” Extension tube
8. H-26-10 Male Extension Tube Connectors (2 each)
9. H-27-10 Female Extension Tube Coupling (2 each)
10. H-5T-10 Hydraulic Spreader
11. H-4T-10 Hydraulic Wedge
12. H-30-10 Plunger toe
13. H-31-10 Ram toe
14. H-32-10 Flat base plate
15 H-34-10 Wedge head
16. H-35-10 Serrated saddle
17. H-38-10 Rubber Flex Head
18. AC-1 *ORIGINAL* RESCUE AIR CUTTING GUN™
19. PN2 Air cutting gun lubricating oil
20. AC-2 5500 P.S.I. Capacity high flow preset single stage air regulator
21. AC-3 15’ whip hose with pneumatic couplings, 300 P.S.I. working pressure
22. AC-4 Positive Retention quick change chisel holders (3 each)
23. AC-6 Dual Sided “T” Type Chisels for cutting sheet metal cutting (2 each)
24. AC-7 7” Short Flat Chisels for cutting heavy plate and bolts (2 each)
25. AC-8 15” Long Flat Chisels for cutting heavy plate and bolts (2 each)
26. M-1 72” x 80” Aluminized Rescue Blanket and Protective Case
27. CC3232 Cold Chisel 1” x 12”
28. Crow Bar 30” Straight Crow Bar
29. Wrench 8” Adjustable Wrench
30. 1.25H 2 lb. Engineer’s Hammer
31. 2.00H 2 lb. Sledge Hammer
33. F-11 Rescue Knife
34. PSC7 Side Cutting Pliers 7”
35. PSC10 Side Cutting Pliers 10” Lineman’s
36. VG10 Self Adjusting Piers with locking capability 10”
37. SDS Screwdriver set Phillips 1, Phillips 2, Phillips 3, Flat tip 4”, 6”, 6”
38. F9 Bull Dog Aviation Cutter
39. FL-1 Fuel Line, Wooden, 10 ea.
40. 653 Pistol grip Hack Saw
41. 218 5 ea. spare 18 TPI shatterproof hacksaw blades
42. Axe Survival Axe® (Pry Axe is available as an option.) (Not Shown)
43. Manual Operation Manual (Not Shown)
44. H-70 RS-4 Rescue Tool Storage Box
45. AC-9 C-10 Air Cutting Gun Storage Box
46. Video Air Cutting Gun operation video (Not Shown)
All pumps, hoses, and rams, are filled with mineral oil, purged of air and non-destructively proof tested to 1½ times the working capacity of the tool prior to shipment.
THIS SELF CONTAINED 10 TON AIRCRAFT EXTRICATOR® RESCUE SET MEETS OR EXCEEDS THE REQUIREMENTS OF FAA ADVISORY CIRCULAR AC:150/5210-14B “AIRPORT FIRE AND RESCUE EQUIPMENT, TOOLS AND CLOTHING TABLE 1” FOR THE FOLLOWING ITEMS: 10 TON HYDRAULIC RESCUE SET, PNEUMATIC AIR HAMMER, FIRE BLANKET, SMALL AXE, AND THE TABLE 2 TOOLS.
The EXTRICATR® Model RS-4 AIRCRAFT RESCUE SET and the AIR CUTTING GUN, Model C-10A are each packaged in their own heavy duty storage boxes which can be sealed or locked to ensure content security. The ALUMINIZED RESCUE BLANKET, Model M-1 has its own protective case.
EXTRICATOR® is a Registered Trademark of Special Service and Supply, Inc. All Rights Reserved
Survival Axe® is a Registered Trademark of Off The Grid Tools Corporation. All Rights Reserved
Shipping weight: 235 lbs. Ships via truck freight or FedEx Ground in three boxes, at customer's option.
2. H-7T Short 10 ton ram (6” stroke)
3. H-8T Long 10 ton ram (10” stroke, (Optional, NOT SHOWN)
4. H-20-10 30” Extension tube
5. H-22-10 18” Extension tube
6. H-23-10 10” Extension tube
7. H-24-10 5” Extension tube
8. H-26-10 Male Extension Tube Connectors (2 each)
9. H-27-10 Female Extension Tube Coupling (2 each)
10. H-5T-10 Hydraulic Spreader
11. H-4T-10 Hydraulic Wedge
12. H-30-10 Plunger toe
13. H-31-10 Ram toe
14. H-32-10 Flat base plate
15 H-34-10 Wedge head
16. H-35-10 Serrated saddle
17. H-38-10 Rubber Flex Head
18. AC-1 *ORIGINAL* RESCUE AIR CUTTING GUN™
19. PN2 Air cutting gun lubricating oil
20. AC-2 5500 P.S.I. Capacity high flow preset single stage air regulator
21. AC-3 15’ whip hose with pneumatic couplings, 300 P.S.I. working pressure
22. AC-4 Positive Retention quick change chisel holders (3 each)
23. AC-6 Dual Sided “T” Type Chisels for cutting sheet metal cutting (2 each)
24. AC-7 7” Short Flat Chisels for cutting heavy plate and bolts (2 each)
25. AC-8 15” Long Flat Chisels for cutting heavy plate and bolts (2 each)
26. M-1 72” x 80” Aluminized Rescue Blanket and Protective Case
27. CC3232 Cold Chisel 1” x 12”
28. Crow Bar 30” Straight Crow Bar
29. Wrench 8” Adjustable Wrench
30. 1.25H 2 lb. Engineer’s Hammer
31. 2.00H 2 lb. Sledge Hammer
33. F-11 Rescue Knife
34. PSC7 Side Cutting Pliers 7”
35. PSC10 Side Cutting Pliers 10” Lineman’s
36. VG10 Self Adjusting Piers with locking capability 10”
37. SDS Screwdriver set Phillips 1, Phillips 2, Phillips 3, Flat tip 4”, 6”, 6”
38. F9 Bull Dog Aviation Cutter
39. FL-1 Fuel Line, Wooden, 10 ea.
40. 653 Pistol grip Hack Saw
41. 218 5 ea. spare 18 TPI shatterproof hacksaw blades
42. Axe Survival Axe® (Pry Axe is available as an option.) (Not Shown)
43. Manual Operation Manual (Not Shown)
44. H-70 RS-4 Rescue Tool Storage Box
45. AC-9 C-10 Air Cutting Gun Storage Box
46. Video Air Cutting Gun operation video (Not Shown)
All pumps, hoses, and rams, are filled with mineral oil, purged of air and non-destructively proof tested to 1½ times the working capacity of the tool prior to shipment.
THIS SELF CONTAINED 10 TON AIRCRAFT EXTRICATOR® RESCUE SET MEETS OR EXCEEDS THE REQUIREMENTS OF FAA ADVISORY CIRCULAR AC:150/5210-14B “AIRPORT FIRE AND RESCUE EQUIPMENT, TOOLS AND CLOTHING TABLE 1” FOR THE FOLLOWING ITEMS: 10 TON HYDRAULIC RESCUE SET, PNEUMATIC AIR HAMMER, FIRE BLANKET, SMALL AXE, AND THE TABLE 2 TOOLS.
The EXTRICATR® Model RS-4 AIRCRAFT RESCUE SET and the AIR CUTTING GUN, Model C-10A are each packaged in their own heavy duty storage boxes which can be sealed or locked to ensure content security. The ALUMINIZED RESCUE BLANKET, Model M-1 has its own protective case.
EXTRICATOR® is a Registered Trademark of Special Service and Supply, Inc. All Rights Reserved
Survival Axe® is a Registered Trademark of Off The Grid Tools Corporation. All Rights Reserved
Shipping weight: 235 lbs. Ships via truck freight or FedEx Ground in three boxes, at customer's option.
