AIR/HYDRAULIC PUMPS
AIR/HYDRAULIC PUMP
AIR/HYDRAULIC PUMP
H-82 Air/Hydraulic pump will operate all single acting hydraulic cylinders, with the use of an integral foot or hand operated treadle valve. The treadle valve on the base model pump provides a power on position, a power off position and a center lockout position to prevent pressure bleed off for the operation of single acting cylinders.
LSC-82 utilizes a 4-way valve assembly, (shown above), allows the pump to operate dual acting cylinders. The 4 way valve may be hand or foot operated, like the treadle valve, moving the operating lever in one direction provides power to one side of a double acting cylinder. Moving the valve on the other direction provides power to the opposite side of the dual acting cylinder, and the center position prevents flow to the cylinder, while acting as a safety to prevent inadvertent operation in the opposite direction.
The pump has a 97.6 cubic inch oil reservoir is constructed of cast aluminum and power coated to prevent corrosion. The reservoir and valve body provide strength, light weight and exceptional corrosion resistance. The large 11-1/2" by 4-3/4" footprint provides excellent stability even on uneven surfaces.
Both Air/Hydraulic pumps have an inlet air pressure operating range of 40 P.S.I. to 170 P.S.I. while providing 10,000 P.S.I. of hydraulic pressure at a rate of 13.1 cubic inches per minute. The pump's factory set internal pressure relief valve provides overload protection meeting ANSI/ASME B310.1 Safety Standards.
Air consumption is a low 10 C.F.M. @ 90 P.S.I. The exhaust from this pump is clean breathable air, making it ideal for use in confined space operations, hazardous environments and under water. Our factory pre-set high pressure air regulators are designed to operate from any compressed air supply cylinder equipped a CGA valve, with a supply pressure ranging from 300 P.S.I. to 6,000 P.S.I. without requiring any adjustment!
Both the single acting and dual acting pumps are equipped with a convenient folding carrying handle. The pump is easily operated by either hand or foot pressure with a treadle valve or lever control valve. Each valve system is supplied with a Center Off, “no flow” position. The Center Off position is designed to hold hydraulic pressure even with the air supply disconnected, making it ideal for rescue, construction and industrial applications utilizing either single or dual acting ram cylinders of The “BOSS” Tool™ or The Land Shark Cutter™.
Call for shipping weights, which vary based on valve options selected.
Shipped via FedEx Ground®.
LSC-82 utilizes a 4-way valve assembly, (shown above), allows the pump to operate dual acting cylinders. The 4 way valve may be hand or foot operated, like the treadle valve, moving the operating lever in one direction provides power to one side of a double acting cylinder. Moving the valve on the other direction provides power to the opposite side of the dual acting cylinder, and the center position prevents flow to the cylinder, while acting as a safety to prevent inadvertent operation in the opposite direction.
The pump has a 97.6 cubic inch oil reservoir is constructed of cast aluminum and power coated to prevent corrosion. The reservoir and valve body provide strength, light weight and exceptional corrosion resistance. The large 11-1/2" by 4-3/4" footprint provides excellent stability even on uneven surfaces.
Both Air/Hydraulic pumps have an inlet air pressure operating range of 40 P.S.I. to 170 P.S.I. while providing 10,000 P.S.I. of hydraulic pressure at a rate of 13.1 cubic inches per minute. The pump's factory set internal pressure relief valve provides overload protection meeting ANSI/ASME B310.1 Safety Standards.
Air consumption is a low 10 C.F.M. @ 90 P.S.I. The exhaust from this pump is clean breathable air, making it ideal for use in confined space operations, hazardous environments and under water. Our factory pre-set high pressure air regulators are designed to operate from any compressed air supply cylinder equipped a CGA valve, with a supply pressure ranging from 300 P.S.I. to 6,000 P.S.I. without requiring any adjustment!
Both the single acting and dual acting pumps are equipped with a convenient folding carrying handle. The pump is easily operated by either hand or foot pressure with a treadle valve or lever control valve. Each valve system is supplied with a Center Off, “no flow” position. The Center Off position is designed to hold hydraulic pressure even with the air supply disconnected, making it ideal for rescue, construction and industrial applications utilizing either single or dual acting ram cylinders of The “BOSS” Tool™ or The Land Shark Cutter™.
Call for shipping weights, which vary based on valve options selected.
Shipped via FedEx Ground®.