THE "ORIGINAL RESCUE AIR HAMMER"
C-10 Air Cutting Gun Set
The "Original Air Chisel" designed for rescue
The "Original Air Chisel" designed for rescue
This is the “original" AIR HAMMER CHISEL, designed and manufactured to the exacting standards of the Emergency Squad Training Institute. Designed for rescue professionals, it is the most potent air hammer chisel in its class, combining compact size, reliability, quick set-up, and ease of operation.
This Air Cutting Gun Set is Made in America.
The "C-10 "ORIGINAL RESCUE AIR CUTTING GUN SET" is designed to drive pins and rapidly cut heavy metal including quarter-inch (1/4”) mild steel plate, three-quarter inch (3/4”) mild steel bolts, automobile safety door lock bolts, vehicle-door posts, automobile roofs, seat brackets in vehicles and aircraft, fiberglass, carbon fiber, aluminum, metal buildings, metal roofing, sheet metal ducts, wood, stone, masonry and concrete in a matter of seconds. The C-10 AIR CUTTING GUN has the highest operating pressure combined with the fastest piston and the lowest air consumption of any air hammer chisel in the industry. The "Original Air Cutting Gun" is often imitated, but its performance is never duplicated.
To save time and prevent errors, the specially designed American Made single-stage high-pressure air regulator is factory preset and requires no adjustment, eliminating the possibility of the operator selecting the wrong pressure and injuring personnel or damaging the regulator or air-cutting gun. The regulator is designed to provide a constant airflow rate over 4 C.F.M., operating from any air cylinder equipped with a C.G.A. valve and a pressure range from 400 PSI to 5,500 PSI without any adjustment or tools. This heavy-duty high-pressure regulator has a safety relief valve, meeting or exceeding both OSHA 1910.169 and ASME 1968 safety standards. The regulator's gauge is protected by a shock-absorbing rubber guard, and the exclusive hand-tight nut provides rapid attachment of the regulator to the air cylinder without the need for easily lost wrenches or other tools.
All air regulator components are designed to Emergency Squad Training Institute's standards to ensure rapid setup, high strength, and years of reliable, trouble-free operation and service backed up by an unprecedented full seven-year warranty on the regulator.
- The ORIGINAL HEAVY DUTY RESCUE TYPE AIR CUTTING GUN OPERATING ON 300 LBS. OF AIR PRESSURE
- THE ONLY PRESET, HIGH PRESSURE, HIGH VOLUME REGULATOR THAT REQUIRES ABSOLUTELY NO ADJUSTMENT WHEN OPERATING ON ANY PRESSURE FROM 400 P.S.I. to 5,500 P.S.I. AIR CYLINDERS
- 2,100 POWERFUL IMPACTS PER MINUTE WITH A LOW 3.5 C.F.M. OF AIR USAGE
- HIGHLY FLEXIBLE FIFTEEN (15) FEET LONG, 300 P.S.I. WORKING PRESSURE BRAIDED 1/4 INCH AIR HOSE
- 18” LONG HIGHLY FLEXIBLE, HIGH PRESSURE, STEEL BRAIDED, CUT RESISTANT WHIP HOSE PROVIDED ON AIR CUTTING GUN
- TURN TYPE “T” TYPE SHEET METAL PANEL CUTTER CHISEL OR OPTIONAL DOUBLE "T" CHISEL
- TURN TYPE SEVEN (7) INCH FLAT CHISEL
- TURN TYPE FIFTEEN (15) INCH FLAT CHISEL
- THREE KNURLED QUICK CHANGE, TURN TYPE SAFETY RETAINERS
- EXCLUSIVE HEAVY DUTY, 16 GAUGE STEEL STORAGE CASE IS DESIGNED TO PROVIDE PROTECTION AND SECURITY FOR THE TOOLS WITH TWO LOCKABLE LATCHES AND A LARGE CARRY HANDLE
- EXCLUSIVE THE ONLY REGULATOR IN THE INDUSTRY WITH A SEVEN YEAR WARRANTY
- EXCLUSIVE THE ONLY AIR HAMMER IN THE INDUSTRY WITH A 2 YEAR WARRANTY
- INSTRUCTION MANUAL INCLUDED
- MADE IN AMERICA, THIS IS THE MOST POWERFUL, STRONGEST, LIGHTEST WEIGHT AND SMALLEST AIR CHISEL IN ITS CLASS!
This rescue air cutting gun is equipped with an eighteen-inch long, highly flexible, high strength, steel braid 3000 PSI working pressure whip hose at the base of the handle with ISO 18752 Performance Standard, operation creating an exceptionally cut resistant hose with great flexibility, eliminating the access problems and movement restrictions created by air fittings located at the base of the air gun handle.
The highly flexible 15 feet long air supply hose has a braided internal core, rubber outer covering crimped end fittings, and quick couplers that are all designed for the 300 p.s.i. operating pressure of the air hammer chisel.
The supplied .401 shank, turn-type chisels are designed to provide the operator with the ability to quickly and easily change cutting direction simply by turning the chisel rather than requiring turning the gun or stopping to index the chisel-like some fixed chisel manufacturers require. The high-strength alloy steel chisels included with this set provide rapid forcible entry into vehicles, aircraft, metal buildings, fire doors, security grates, garage doors, machinery, ventilation and exhaust ducts, masonry, stone, concrete, fiberglass, and wood while retaining their cutting edge. Special-purpose chisels are available for breaching concrete, masonry, brick, and block walls, busting through spot welds, and cutting and scraping.
Our patent-pending quick change, screw-on, turn-type safety chisel retainers are designed to provide the safety and security of positive chisel retention, not available with spring-type chisel retainers, combined with the ability to turn the chisel for easier and quicker cutting. Our quick change chisel retainers provide for one-handed chisel operation. The quick change chisel retainers have a knurled nonslip surface allowing the operator to screw the retainer and chisel onto the air-cutting gun in seconds, while wearing gloves, providing rapid chisel changes without tools.
The C-10 air gun set has an unprecedented full two-year warranty against defects in material and workmanship. The special high-pressure air regulator has a full seven-year warranty against defects in material and workmanship. These are the longest warranties in the industry.
The ideal forcible entry tool for FIRE DEPARTMENTS, RESCUE SQUADS, U.S.A.R. TEAMS, POLICE DEPARTMENTS, SWAT TEAMS, the MILITARY, and anyone involved in EXTRICATION and RESCUE.
C-10 RESCUE AIR CUTTING GUN SET COMPONENTS
OPTIONAL SPECIAL PURPOSE CHISELS
In addition to the chisels supplied with the "ORIGINAL" C-10 RESCUE AIR CUTTING GUN SET, several types of special purpose chisels are available for those unique situations where the regular chisel isn't appropriate. These optional chisels greatly expand the versatility of the "Original" C-10 RESCUE AIR CUTTING GUN.
AC 15 SPOT WELD BUSTER CHISEL'S NOTCH CENTERS THE CHISEL ON THE WELD FOR FASTER CUTTING.
AC-16 COLD CHISEL'S BROAD FLAT TIP RAPIDLY CUTS THROUGH HEAVY METAL
AC-19 OPTIONAL DOUBLE PANEL CUTTER & SAFETY RETAINER, PROVIDES TWO PANEL CUTTING BLADES IN A SINGLE CHISEL
AC-17 TAPERED PUNCH IS USED TO RAPIDLY PENETRATE BRICK, CONCRETE BLOCK AND MASONRY
Ships via FedEx Ground. Shipping weight 35 lbs.
AIR CUTTING GUN COMPARISON CHART
Model AC-10 AIR GUN 40 711 AIR 811 AIR
THE "ORIGINAL" CHISEL CHISEL
AIR CUTTING GUN
Manufacturer Special Service and Supply Paratech Ajax Ajax
Overall Length 8-7/8" 21.2" 9-1/2" 10"
Overall Width 1.9" 1.9" 2.25" NOT SPECIFIED
Overall Height 6" 6.125" 9" NOT SPECIFIED
Weight 4.5 lb. 7 lb. 5 lb. 5 lb.
Chisel Diameter .401" .4" .401" .401"
Chisel Retention Screw Type Safety Retainer Spring Retainer Spring Retainer Spring Retainer
System
Rapid Chisel Change YES YES YES YES
Tools Required to
Change Chisel NO YES YES YES
Chisel Retainers
Supplied 3 1 1 1
Turn Type Chisels YES NO NO NO
Hammer Blows per
Minute 2,100 BPM 600 BPM 2,100 BPM 2,800 BPM
Piston Stroke 3.5" 3.875" 3.5" 3.6"
Whip Hose YES NO NO NO
Air Regulator Pre-Set No Adjustment Must be Set For Must be Set For Must be Set For
Type Needed Material Cut Material Cut Material Cut Air Regulator
Warranty 7 years 1 year 1 year 1 year
Air Regulator Inlet
Pressure 2215 - 6000 PSI 2215 - 6000 PSI 2215 - 4500 PSI 2215 - 4500 PSI
Operating Pressure 300 PSI 200 PSI 90 PSI 90 PSI
Air Consumption 3.5 CFM 5.2 CFM 4 CFM 8 CFM
Air Hose Length 15 Feet 32 Feet 15 Feet 15 Feet
Air Hose Size 1/4" 3/8" 1/4" 1/4"
16 Gauge Steel
Storage Box YES NO NO NO
Operation Video YES NO NO NO
Operation Manual YES YES YES YES
In Line Oiler NOT NEEDED REQUIRED NONE NEEDED NONE NEEDED
May be used near
ignition sources YES NO ? ?
Air Gun Warranty 2 years 1 year 1 year 1 year
Made in America YES YES YES YES
MATERIALS CUT
1/4" Steel Plate YES Not Identified Not Identified Not Identified
3/4" Nader Bolts YES YES YES YES
Vehicles YES YES YES YES
Metal Buildings YES YES YES YES
Aircraft YES YES YES YES
Exhaust Ducts YES YES Not Identified Not Identified
Composite Material YES YES Not Identified Not Identified
Masonry YES YES YES YES
Concrete YES NOT identified Not identified Not identified
Wood YES Not Identified Not Identified Not identified
Model AC-10 AIR GUN 40 711 AIR 811 AIR
THE "ORIGINAL" CHISEL CHISEL
AIR CUTTING GUN
Manufacturer Special Service and Supply Paratech Ajax Ajax
Overall Length 8-7/8" 21.2" 9-1/2" 10"
Overall Width 1.9" 1.9" 2.25" NOT SPECIFIED
Overall Height 6" 6.125" 9" NOT SPECIFIED
Weight 4.5 lb. 7 lb. 5 lb. 5 lb.
Chisel Diameter .401" .4" .401" .401"
Chisel Retention Screw Type Safety Retainer Spring Retainer Spring Retainer Spring Retainer
System
Rapid Chisel Change YES YES YES YES
Tools Required to
Change Chisel NO YES YES YES
Chisel Retainers
Supplied 3 1 1 1
Turn Type Chisels YES NO NO NO
Hammer Blows per
Minute 2,100 BPM 600 BPM 2,100 BPM 2,800 BPM
Piston Stroke 3.5" 3.875" 3.5" 3.6"
Whip Hose YES NO NO NO
Air Regulator Pre-Set No Adjustment Must be Set For Must be Set For Must be Set For
Type Needed Material Cut Material Cut Material Cut Air Regulator
Warranty 7 years 1 year 1 year 1 year
Air Regulator Inlet
Pressure 2215 - 6000 PSI 2215 - 6000 PSI 2215 - 4500 PSI 2215 - 4500 PSI
Operating Pressure 300 PSI 200 PSI 90 PSI 90 PSI
Air Consumption 3.5 CFM 5.2 CFM 4 CFM 8 CFM
Air Hose Length 15 Feet 32 Feet 15 Feet 15 Feet
Air Hose Size 1/4" 3/8" 1/4" 1/4"
16 Gauge Steel
Storage Box YES NO NO NO
Operation Video YES NO NO NO
Operation Manual YES YES YES YES
In Line Oiler NOT NEEDED REQUIRED NONE NEEDED NONE NEEDED
May be used near
ignition sources YES NO ? ?
Air Gun Warranty 2 years 1 year 1 year 1 year
Made in America YES YES YES YES
MATERIALS CUT
1/4" Steel Plate YES Not Identified Not Identified Not Identified
3/4" Nader Bolts YES YES YES YES
Vehicles YES YES YES YES
Metal Buildings YES YES YES YES
Aircraft YES YES YES YES
Exhaust Ducts YES YES Not Identified Not Identified
Composite Material YES YES Not Identified Not Identified
Masonry YES YES YES YES
Concrete YES NOT identified Not identified Not identified
Wood YES Not Identified Not Identified Not identified
